How To Clean Oil Rubbed Bronze Faucets

Download Article

Download Article

Oil rubbed statuary is a beautiful finished metal used for many dwelling fixtures and hardware. However, due to its nature every bit a "living" finish, it is susceptible to some natural change and vesture over fourth dimension, including hard h2o spots if the fixture is exposed to moisture. Learn how to properly make clean and care for oil rubbed bronze to continue information technology looking skilful for generations.

1. 1

   Starting time with water. Wipe your oil rubbed bronze fixture with just h2o on a soft cloth.^[1] Often water is all that is needed to clean this type of end.

   • Consider advisedly before you utilize another cleaner likewise water. Because of its irresolute color and quality, oil rubbed bronze needs as picayune cleaning equally possible to maintain its shined finish and natural patina with age.
   • Try h2o first, and always examination some other cleaner on a pocket-sized, inconspicuous surface area of your fixture.^[ii]
   • Dry the fixture immediately with a clean, dry out material.

2. 2

   Apply a non-abrasive sponge for light scrubbing. Dampen a soft sponge to remove hard water stains. Buff dry out with a soft cloth.

   • Don't use steel wool or very scratchy, annoying sponges or cloths. Likewise avoid bleach-based or other harsh cleaners.
   • Discover your fixture after you lot have rubbed gently with a damp sponge and dried information technology. If spots reappear, repeat the process or consider a vinegar solution if the stains are very bad.

   Advertisement

3. 3

   Try a vinegar solution for stubborn stains. Mix one office vinegar with one role h2o for apply on more difficult marks on your bronze cease. Do this for any hard water deposits that just water won't remove.^[3]

   • Test the vinegar mixture on your fixture kickoff by dipping a q-tip into it and applying it to the metal to determine what consequence it will have before yous employ it on the entire surface.
   • Gently rub the vinegar mixture onto your fixture with a soft cloth, or soak a newspaper towel in the mixture and leave information technology on the fixture for about 15 minutes.^[4]

   Advertisement

1. 1

   Absorb water away when you run across it. Preclude hard water stains from forming by blotting your fixture dry whenever you see drops of water. Allowing h2o to evaporate on the surface is what leaves mineral deposits behind.^[five]

   • Use just a dry cloth or towel to absorb whatever moisture, without rubbing or buffing.
   • Do this daily for faucets and other fixtures that are very frequently exposed to water.

2. 2

   Use a high quality wax. ^[6] Apply a very thin layer of wax intended for metals to your fixture. Practise this to assist maintain the polish and protect against h2o stains.

   • Look for a high quality wax like Renaissance Wax, or another brand trusted for employ on antique furniture.
   • Utilise the wax using a soft cloth, ensuring to the best of your ability that no excess builds up in cracks or other areas of the fixture, leaving a residue.
   • Do this maintenance rarely, just when it appears your finish is wearing unusually sparse from damage or overly abrasive cleaning.

3. iii

   Wipe downwardly with oil. Use a very small amount of vegetable oil on your fixture every and so often. Don't utilize so much that it leaves a residual that volition come up off on your easily.

   • Annotation that the oils from human easily on frequently-touched areas will naturally add smooth and create a lighter coloring on the bronze over time.^[7]
   • Do this maintenance merely when it appears your finish is losing smooth, either from excessive wear or overly abrasive cleaning.

   Advertisement

1. 1

   Sand down your fixture to repaint. Sand down the end on your fixture if it has become severely damaged and you decide to repaint it. Starting with sanding volition create an even surface, merely isn't ever necessary depending on the fixture and damage.

   • Think carefully earlier you remove the existing oil rubbed end on a fixture, as it is has been advisedly treated and aged over fourth dimension, which yous cannot easily replicate with unproblematic spray paint or aging materials.
   • Use a loftier-grit automotive sandpaper or steel wool to sand down the metal without unevenly scratching it.^[viii]

2. ii

   Use a spray finish. ^[9] Attempt a spray pigment that mimics an oil rubbed statuary cease. Employ this method for a quick update to a fixture.^[ten]

   • Utilize a thin glaze of spray primer to your fixture after sanding and before painting. You may find that your oil rubbed bronze spray paint has primer already included, in which instance y'all may skip this step.
   • Spray several thin coats of your spray pigment on rather than one thicker coat to help it bind and cure ameliorate to the metal.
   • Remember to spray screws and whatever other related hardware with the same paint finish. Y'all can insert a spare key into a doorknob you're painting so that the paint doesn't clog up the keyhole.^[eleven]

3. 3

   Effort an aging solution. Use an aging solution on brass to help achieve the same cured look created by oil rubbed bronze. Do this only for very damaged oil rubbed bronze fixtures.

   • Showtime remove existing lacquer using a lacquer thinner and fine-grade steel wool.
   • Use an aging solution intended for bronze and brass. Don safe gloves and condom glasses, as the chemic nature of these solutions can be damaging or harmful.
   • Soak your fixture in the solution as instructed past the specific product, then rinse in cool water to halt the chemic reaction. You can rub some mineral or vegetable oil on after drying to add polish.^[12]

   Advertisement

Add New Question

• Question

  Tin can I soak my oil statuary shower heads in vinegar to clean?

  

  Yes, but make sure it'south non also much vinegar otherwise, it volition take away the color. Dilute the vinegar in water get-go.

• Question

  What can I use to make clean an oil rubbed bronze pelting shower head to unclog the hose?

  

  Toothpaste with fluoride will piece of work. The chemic reaction will smoothen silver, bronze and copper. Information technology will non tarnish or leave a greasy rest. Use steel wool for scouring pad and so not to scratch.

• Question

  How do I make clean a statuary cemetery marker that has turned black?

  

  Apply Brillo pads with lather to scrub the surface, it volition bring out the smooth. Follow this past a sealer or oil to protect against the elements.

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

• Truthful oil rubbed bronze is a delicate terminate that should mostly be allowed to age on its own without disruption for an authentically painted expect. Allow for natural discoloration and changes, cleaning as infrequently as possible.

Advertisement

About This Article

Article Summary X

To rub downward oil-rubbed bronze fixtures, starting time by wiping the fixture downward with a clammy, soft cloth, then drying it with another material right away so you lot don't exit water spots. Alternatively, you can utilise a not-abrasive sponge to gently scrub away whatsoever hard water stains. If you lot even so can't get rid of the water stains, make a mixture of equal parts vinegar and water and rub it onto the fixture with a soft cloth or paper towels.. Then, permit it sit for 15 minutes before wiping it off and drying the fixture with a soft, dry cloth. For tips on how to refinish damaged oil-rubbed bronze fixtures, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 183,644 times.

Did this article help yous?

Source: https://www.wikihow.com/Clean-Oil-Rubbed-Bronze-Fixtures

Posted by: jacksonhury1958.blogspot.com

Share this post